Fuji Electric: Card relays RT

RT series DC-operated general purpose relays
Rated thermal current 3 Amps.

Description
RT card relays are designed for printed circuit board use. They are extremely small in size and are suitable for use in many control applications in low level circuits. They are found in electronic instrumentation, communication, vending machines, office equipment, audio equipment and other consumer products. The RT11 is provided with SPDT contacts and RT17 with 1NO ones. The rated thermal current is 3 Amps.
The contacts have been made from silver allow to ensure a high dependability. The result is very suitable input/output relays for electronic circuits. Coil voltages available range from 5 to 48V DC.

Features

• Miniature size and light weight
• Max. breaking current: 3 Amps at 220V AC, 3 Amps at 30V DC
• 1NO or SPDT types are available.
• High sensitivity with coil power consumption only 0.45W or 0.36W.
• Dust-tight case
• The terminal arrangement of RT relays facilitates attachment to printed circuit boards.
• Available coil voltages 5, 6, 9, 12, 24 and 48V DC.
• UL approved (File No. E83461)
• Adequate clearances provide non-tracking safety.

Performance data

• Operating time:
  Less than 16ms (at rated voltage and ambient temperature 20°C)
• Release time:
  Less than 5ms (at rated voltage and ambient temperature 20°C)
• Mechanical life: 20 million operations
• Electrical life: 100,000 operations (at 24V DC 3A, relative load, T=0ms)
• Dielectric strength:
  1000V AC rms. 1 minute between open contacts
  1500V AC rms. 1 minute between contact and coil
• Insulation resistance: 100 MOhms at 500V DC
• Allowable ambient temp.: -40 to +70°C