Description
The ESM 1 is a 3-phase manual motor started and protector with an adjustable bimetallic Class 10 thermal overload and instantaneous magnetic short circuit trip mechanism. ESM 1 starters are cULus listed for group installations of motors and single motor installations up to 25 FLA. These manual starters can be field wired for single-phase motor applications by connecting the 3 poles in a series. ESM 1 is very flexible in fitting accessories, e.g. auxiliary contacts can be fitted on the right side on the left side or on both sides or under the cover to save space.
Features
| - Compact 45 mm design – saves space |
|
- Meets cULus and international standard IEC 947 |
| - CE Mark |
| - Class 10 bimetallic thermal overload trip |
| - 13 Settings – to cover .10 to 25.0 Amps |
| - Phase failure sensitivity |
| - Ambient temperature compensated |
|
- Snap-on DIN rail mount capability or can be panel mounted with screws |
|
- Open starters can be padlocked in OFF (STOP) position |
|
- Terminals are “fingerproof”, located in the vertical plane, easily accessible from the front with screwdriver guide holes provided for ease of wiring. |
|
- Wide range of accessories, including auxiliary contact, trip alarm, undervoltage release module and shunt trip can be added to the started without tools |
|
- Enclosures, IP 41 general purpose, IP 55 dust and water protection |
|
- Flash plates, IP 41 general purpose, IP 55 dust and water protection |
|
- Emergency Pushbutton for Enclosures and Flash Plates |
|
- Padlock Attachments for Enclosures and Flash Plates |
Standards and Certifications
| Meet or exceed the North American and international IEC 947 standard: |
|
- cULus |
|
File No. E178334, Category NLRV |
|
- IEC 947, DINVDE 0660, CE Mark |
[ Top ] [ Home ] [ Products ] [ Suppliers ] [Additional Information ]
Integrated Control
Solutions
28 Bridge Avenue
Tower Building
Scituate, MA 02066 U.S.A.
800-966-1909
Tel. (781) 545-5100
Fax (781) 545-1949