ESG offers a complete line of contactors that includes contactors (mechanically interlock and non-reversing), overload relays and snap-on accessories. Contactors are most commonly used to switch motor loads in applications where running over current protection is either not required or is provided separately. Contactors consist of a magnetically actuated switch which can be operated by pushbutton station or pilot device such as a proximity switch, limit switch, auxiliary contacts, etc.
Features
|
- Highest horsepower rating in a compact, space saving design, 45 mm frame rated maximum 15 hp at 460V |
|
- Long life twin break contacts |
|
- DIN rail release mechanism conveniently located on line side of contactors |
|
- Designed to 15,000,000 mechanical operations. Adequate for most general duty control applications |
|
- IP 20 fingerproof protection |
|
- Contactors and terminal markings conform to CENELEC EN 50011 |
|
- Holding circuit contacts supplied up to size ESLS710 |
|
- AC and DC operation possible |
Overload Relays ESML.. and ESML../1
|
- 15 Settings – to cover .16 to 26.0 Amps for size ESLS 410 to ESLS 1100 |
|
- 5 Settings (ESML../1) – to cover 11.5 to 43.0 Amps for size ESLS 1500 to ESLS 3700 |
|
- Phase failure sensitivity |
|
- Ambient temperature compensated |
|
- Class 10 – Bimetallic O.L. |
|
- Manual/automatic reset |
|
- Electrical isolated NO-NC contacts |
Accessories
| - Front mounted auxiliary contacts |
|
- Identification clips |
|
- Surge suppressor |
|
Meet or exceed the North American and international
IEC 947 standard |
|
- UL |
|
- CSA |
|
-Contactors ESLS |
|
UL listed 60CI; CSA File No.LR 30821 |
|
IEC 947, DIN VDE 0660, CE Mark |
|
-Overload Relays |
|
UL listed; CSA File LR 45167 |
|
IEC 947, DIN VDE 0660, CE Mark |
[ Top ] [ Home ] [ Products ] [ Suppliers ] [Additional Information ]
Integrated Control
Solutions
28 Bridge Avenue
Tower Building
Scituate, MA 02066 U.S.A.
800-966-1909
Tel. (781) 545-5100
Fax (781) 545-1949